← All products
BurShrink
Heat-shrink sleeve
Woven heat-shrink fabric of polyester and polyolefin. Shrinks to about half diameter; damps abrasion, vibration and rattle.
Operating range: -40°C → +125°C
Request a quote for this productBurShrink combines the protection of a braided sleeve with the bundling of heat-shrink tubing. The fabric — a unique mix of polyester and irradiated modified polyolefin yarns — is among the few woven materials that can shrink, down to 1/2 of its original diameter. The weave stays flexible and resists water, heat and moisture, with strong cut, friction and abrasion protection even at high temperature.
Key points
- 01Shrinks to half the original diameter
- 02−40°C to +125°C for 3000 h; +150°C for 1000 h
- 03Minimum recovery 110°C; recommended 150–200°C
- 04Noise and rattle suppression
Applications
- Mechanical abrasion protection on rubber hoses
- Bundling plastic tubes and wire harnesses
- Vibration and rattle damping
- Automotive and industrial applications
Technical data
- Warp material
- Polyester
- Weft material
- Irradiated modified polyolefin
- Coating
- Modified polyolefin
- Operating temperature
- −40°C → +125°C (3000 h)
- Peak resistance
- −40°C → +150°C (1000 h)
- Minimum recovery
- 110°C
- Recommended recovery
- 150°C – 200°C
- Maximum storage
- 50°C
- Shrink ratio
- Up to 1/2 original diameter
| Warp material | Polyester |
|---|---|
| Weft material | Irradiated modified polyolefin |
| Coating | Modified polyolefin |
| Operating temperature | −40°C → +125°C (3000 h) |
| Peak resistance | −40°C → +150°C (1000 h) |
| Minimum recovery | 110°C |
| Recommended recovery | 150°C – 200°C |
| Maximum storage | 50°C |
| Shrink ratio | Up to 1/2 original diameter |
Share diameter, temperature and application — engineering will get back to you shortly.
Request a quote for this product