← All products
BurHeat
Reflective prosthetic sleeve
Aluminium-reflective sleeve with fiberglass support. Internal and external resistance from −40°C to +350°C.
Operating range: -40°C → +350°C
Request a quote for this productThe bright aluminium surface reflects radiant heat. The outer fiberglass keeps copper pipe off metal contact and still protects at high temperature. Built for control and shift cables, coolant tubes, HVAC pipes, fuel hoses, wire sets and other heat-sensitive parts.
Key points
- 01AL+AG layers: kraft / aluminium / fiberglass
- 02−40°C to +350°C inside and out
- 03Diameter range Ø8 mm – Ø90 mm
- 04Heat resistance 250–350°C
Applications
- Shift-lever and speedometer cables
- Hydraulic systems and electrical lines
- LPG systems and copper-pipe protection
- HVAC pipes and fuel hoses
Technical data
- Material
- AL+AG
- Layer structure
- Outer kraft / aluminium / inner fiberglass
- Heat resistance
- 250–350°C
- Operating temperature
- −40°C → +350°C (inside and out)
- Diameters
- Ø8 mm – Ø90 mm
- Length
- Cut-to-length or 10 m seamless coils
- Length tolerance
- ±5 mm up to 400 mm; ±1% above
- Corrugations
- Min. 400 / m
- Bend radius
- ~1.5 × ID
- Test conditions
- −40°C, 4 h / +250°C, 48 h
| Material | AL+AG |
|---|---|
| Layer structure | Outer kraft / aluminium / inner fiberglass |
| Heat resistance | 250–350°C |
| Operating temperature | −40°C → +350°C (inside and out) |
| Diameters | Ø8 mm – Ø90 mm |
| Length | Cut-to-length or 10 m seamless coils |
| Length tolerance | ±5 mm up to 400 mm; ±1% above |
| Corrugations | Min. 400 / m |
| Bend radius | ~1.5 × ID |
| Test conditions | −40°C, 4 h / +250°C, 48 h |
Share diameter, temperature and application — engineering will get back to you shortly.
Request a quote for this product